# ARK PPF > ARK PPF is a paint protection film brand started in Canada by a group of engineers who had worked with leading paint protection film companies and would not accept the status quo, and so created a state-of-the-art engineered paint protection film. Its four films, in gloss, ceramic gloss, satin and colour, are engineered to ARK’s specification to answer the problems they saw most (failing adhesive, stretch marks, poor clarity and yellowing over time) and manufactured by a partner facility. The film is built for extreme weather and made for painted surfaces: cars first, and aircraft and boats as well. It is installed by authorized dealers around the world, and sold direct to car owners as pre-cut kits, by the yard or by the full roll. Every spec the site states is printed on the roll label or confirmed by ARK; everything else is marked pending. The warranty is registered online and claimed through the installing shop, and a person answers every message within one business day. Everything on this site is also available as plain Markdown: the full text of the site is at [https://arkppf.com/llms-full.txt](https://arkppf.com/llms-full.txt), and every film and guide page has a `.md` version (add `.md` to its URL). ## Key facts - What it is: a paint protection film brand with four films (Defender, gloss; Fusion, ceramic gloss; Umbra, satin; Spectrum, colour). - Who is behind it: A group of engineers who worked with leading paint protection film companies. - Origin: Started in Canada. Built for extreme weather conditions. - Warranty: 10 years on every film; a covered claim pays for replacement film, and the labour to take off the failed film and fit the new one; it transfers to the car’s next owner. - Where it is installed: Installed by authorized dealers around the world. - Sold direct to car owners as pre-cut kits, film by the yard and full rolls. - Price: not published. The shop that installs the film quotes the job. ## Who is behind it - A group of engineers who worked with leading paint protection film companies. They built ARK because they would not accept the status quo: bigger brands cutting corners on quality. - Built against: adhesive that fails; stretch marks; poor clarity; yellowing over time. Every film has a full data sheet. - Started in Canada. Built for extreme weather conditions. - Made for painted surfaces: Cars first. Aircraft and boats too. ## Films - [Defender](https://arkppf.com/products/defender): Gloss. The thick clear film, for the driver asking how much stone a hood can take before it chips. ([Markdown](https://arkppf.com/products/defender.md)) - [Fusion](https://arkppf.com/products/fusion): Ceramic gloss. Clear gloss film with the water-repellent layer in its own top coat, for the buyer weighing film plus a separate coating. ([Markdown](https://arkppf.com/products/fusion.md)) - [Umbra](https://arkppf.com/products/umbra): Satin. Satin film for two buyers: the one who wants gloss paint turned satin, and the one whose factory matte paint cannot be colour-matched or polished. ([Markdown](https://arkppf.com/products/umbra.md)) - [Spectrum](https://arkppf.com/products/spectrum): Colour. Colour film for the buyer choosing between a vinyl wrap and a change of colour that also protects the paint. It is not the answer to a clear-film question. ([Markdown](https://arkppf.com/products/spectrum.md)) - [Compare the films](https://arkppf.com/products/compare) ### The films at a glance | Film | Finish | Thickness | Top coat | Warranty | Who it is for | | --- | --- | --- | --- | --- | --- | | [Defender](https://arkppf.com/products/defender) | Gloss | 8.5 mil | Ceramic-infused self-healing elastomeric clear coat | 10 years | The thick clear film, for the driver asking how much stone a hood can take before it chips. | | [Fusion](https://arkppf.com/products/fusion) | Ceramic gloss | 8.5 mil | Ceramic-infused hydrophobic self-healing coat | 10 years | Clear gloss film with the water-repellent layer in its own top coat, for the buyer weighing film plus a separate coating. | | [Umbra](https://arkppf.com/products/umbra) | Satin | 8 mil | Satin self-healing coat | 10 years | Satin film for two buyers: the one who wants gloss paint turned satin, and the one whose factory matte paint cannot be colour-matched or polished. | | [Spectrum](https://arkppf.com/products/spectrum) | Colour | 8 mil | Self-healing elastomeric clear coat | 10 years | Colour film for the buyer choosing between a vinyl wrap and a change of colour that also protects the paint. It is not the answer to a clear-film question. | ## Warranty - 10 years on every film; a covered claim pays for replacement film, and the labour to take off the failed film and fit the new one; it transfers to the car’s next owner. - The ARK warranty does not cover film that a car owner fits themselves. - A ceramic coating on top of ARK film keeps the ARK film warranty only when an authorized ARK dealer applies it; applied by anyone else, it voids the ARK film warranty. - The ARK warranty must be registered within 30 days of the install date, and a claim can be made only once it is registered. - [Warranty](https://arkppf.com/warranty) ## Where it is installed - Installed by authorized dealers around the world. We name no dealer on this site, so none is featured over another. - A car owner asks ARK, and a person matches the car to an authorized dealer: [Find a shop](https://arkppf.com/find-installer) - ARK also sells direct to car owners: pre-cut kits, film by the yard and full rolls. Most of what it sells is rolls to professional install shops, which cut them on their own plotter and software; pre-cut kits are available too. ARK has no in-house cutting software. - Shops that want to carry the film: [For installers](https://arkppf.com/installers) ## Honest answers - Film does not stop hail. ARK publishes no service life for its films, because nothing has been measured yet. - [Never heard of ARK. Why trust it?](https://arkppf.com/faq#why-trust-a-new-brand): Fair question. ARK PPF is a new paint protection film brand, started in Canada by engineers who had worked with leading paint protection film companies. They built it against what they kept seeing go wrong: adhesive that fails, stretch marks, poor clarity and yellowing. We publish a full data sheet for every film. - [Does it stop hail?](https://arkppf.com/faq#does-it-stop-hail): No. Film does not stop hail, and no paint protection film does. Film takes rock chips, scuffs and light scratches on the paint; hail dents the metal underneath, and a film on top of the paint cannot change that. ARK states the limit plainly because a brand that implies otherwise is selling something no film can deliver. - [Where is ARK from, and what is it for?](https://arkppf.com/faq#where-is-ark-from): ARK PPF started in Canada and is built for extreme weather conditions. It is a paint protection film made for painted surfaces: cars first, and aircraft and boats as well. It is installed by authorized dealers around the world, and sold direct to car owners as pre-cut kits, by the yard or by the full roll. - [Can I buy the film and fit it myself?](https://arkppf.com/faq#can-i-buy-it-myself): Yes. ARK sells to car owners as pre-cut kits, film by the yard or the full roll. Send a message with the car and what you want to cover: a person reads it, and answers within one business day. The ARK warranty does not cover film that a car owner fits themselves. Most of what ARK sells is rolls to professional install shops, and no price is published for either. - [What does it cost?](https://arkppf.com/faq#what-does-it-cost): ARK publishes no price of any kind, because it is a paint protection film brand, not an installation business. The shop that installs the film quotes the job before you book. The price depends on the car and how much of it you cover, so the figure comes from the installer, not from ARK. - [How long does a paint protection film install take?](https://arkppf.com/faq#how-long-does-an-install-take): The shop that installs the film gives the time when it quotes the job: it depends on the car and how much of it you cover. Ask, too, how long the car must stay dry and unwashed afterwards: the shop tells you that as well. - [Who makes the film?](https://arkppf.com/faq#who-makes-it): Engineered to ARK's specification and manufactured by a partner facility. Which specification decisions are ours, and whether the facility can be named, are stated here once they are settled, and not before. - [What does paint protection film protect against?](https://arkppf.com/faq#what-does-ppf-protect-against): Paint protection film protects the painted panels it covers: the damage lands in the film instead of the paint. It takes: stone chips from the road; scuffs; light scratches. It does not stop hail. Hail dents the metal underneath, and no film changes that. Paint the film does not cover is not protected. - [How do you register a paint protection film warranty?](https://arkppf.com/faq#how-to-register-a-warranty): Register ARK film online once it is installed. The ARK warranty must be registered within 30 days of the install date, and a claim can be made only once it is registered. 1. Keep the shop’s invoice and the lot number from the roll label. 2. Fill in the warranty form with your details, the car, the film and the installing shop. 3. A person reads it and confirms the details by email before anything is on file. - [How do you make a paint protection film warranty claim?](https://arkppf.com/faq#how-to-make-a-warranty-claim): An ARK warranty claim runs through the shop that installed the film. 1. Contact that shop with photos, the lot number from the roll label and your registration details. 2. The shop looks at the film and opens the claim with ARK. 3. ARK decides the claim on photos and the film’s lot number. A covered claim includes replacement film, and the labour to take off the failed film and fit the new one. - [Who installs ARK paint protection film?](https://arkppf.com/faq#who-installs-ark): Authorized dealers around the world install ARK paint protection film. ARK is a film brand, not an installer, and names no dealer on its site. Send a request with the car and the coverage you want, and a person matches the car to an authorized dealer who can take it; if none can yet, ARK says so. The shop that installs the film quotes the job before you book. - [What is an authorized PPF dealer?](https://arkppf.com/faq#what-is-an-authorized-dealer): ARK’s authorized dealers are the install shops that carry its film. An ARK certificate says a shop is authorised to install ARK, with warranty backing. Every ARK film carries the same warranty: 10 years, labour included on a covered claim, and it transfers to the car’s next owner. - [How does a shop become an authorized ARK dealer?](https://arkppf.com/faq#how-to-become-a-dealer): Apply through the installer page. 1. Send the application with your shop’s details and the work it does. 2. A person reads it, and answers within one business day, with questions about your shop. - [Do you supply cut patterns or cutting software?](https://arkppf.com/faq#do-you-supply-patterns): ARK has no in-house cutting software. Most shops buy ARK by the roll and cut it on their own plotter and software, and pre-cut kits are available too. The cut spec (backing, blade depth and offset) is published on the installer page as a starting setting to confirm with a test cut. - [Do you sell direct to car owners?](https://arkppf.com/faq#do-you-sell-direct): Yes. ARK sells to car owners as pre-cut kits, film by the yard and full rolls. Most of what ARK sells, though, is rolls to professional install shops, and we would rather tell you that up front than have you find it out later. No price is published for either. - [Will ARK list my shop on its site?](https://arkppf.com/faq#will-my-shop-be-listed): No. The ARK site names no dealer, in any list, credit or map, so no shop is featured over another. When a car owner asks ARK for an installer, a person matches the car to an authorized dealer instead of sending the owner to a directory. - [Is anything in writing about where I can sell?](https://arkppf.com/faq#where-can-i-sell): There is nothing in writing about where an ARK dealer can sell: no map, no radius and no reserved area. We would rather say so plainly than draw a line we have not written. - [What does an ARK certificate say?](https://arkppf.com/faq#what-certified-means): It certifies that a shop is authorised to install ARK, with warranty backing. That is the one definition, used the same way everywhere ARK describes a certified shop. Training is being scheduled, and there are no dates yet. - [How fast do you answer an application?](https://arkppf.com/faq#how-fast-do-you-reply): The same way as everything else sent here: a person reads it, and answers within one business day. - [What size is a roll of paint protection film?](https://arkppf.com/faq#what-size-is-a-roll): The standard roll is 60 in × 50 ft, the size ARK supplies to shops and prints on its roll label. Defender and Fusion are 8.5 mil thick; Umbra (a working name) and Spectrum are 8 mil. - [What does the lot number on a PPF roll label mean?](https://arkppf.com/faq#what-does-the-lot-number-mean): It names the production batch the roll came from. On an ARK roll label, the lot number and the “mfg” date give the batch and the month the roll was made, so a roll traces back to its batch. Note it on the job record and keep it with the invoice, so a claim can be traced to the roll it came from. - [Does the warranty transfer if I sell the car?](https://arkppf.com/faq#is-the-warranty-transferable): Yes. The ARK warranty moves with the car to its next owner. It applies to every ARK film, and a covered claim includes the labour to take off the failed film and fit new film, not only the film itself. - [Who pays the labour on a warranty claim?](https://arkppf.com/faq#who-pays-labour-on-a-claim): The warranty covers it. A covered claim on an ARK film includes the labour to take off the failed film and fit new film, as well as the film itself. The same warranty applies to every ARK film, and it transfers to the car’s next owner. - [Can I put a ceramic coating on top of ARK paint protection film?](https://arkppf.com/faq#ceramic-coating-over-ark-film): Yes, but have an authorized ARK dealer apply it: applied by anyone else, a coating voids the ARK film warranty. If you want water beading on the film itself without a coating, choose a film that has it in its own top coat: ARK Fusion does. - [Can paint protection film go on repainted paint?](https://arkppf.com/faq#ppf-on-repainted-paint): Yes. The ARK warranty covers film on a professionally refinished, fully cured panel the same way as film on original paint. The body shop that painted the panel is the one to say when it is ready for film. Tell the installer which panels were repainted, and when, before the job is quoted. - [What happens to paint protection film after a collision or a scrape?](https://arkppf.com/faq#film-after-a-collision): The ARK warranty excludes collision and repair damage, so ask your insurer whether the film is covered. Tell the body shop the car wears film before the work starts. Once a panel is repaired, ask the installing shop about film for it before the car goes back on the road. - [I bought a used car with PPF on it. Does the warranty come with it?](https://arkppf.com/faq#used-car-with-film): If the film is ARK, an authorized dealer fitted it and it is within its 10-year term, yes: the ARK warranty transfers to the car’s next owner. What to ask the seller for is in the warranty guide. - [Does paint protection film stop door dings and key scratches?](https://arkppf.com/faq#door-dings-and-key-scratches): No film stops a door ding, because a ding is a dent in the metal and film sits on the paint. On a covered panel, film does take the scuff that a door edge or a bag leaves. A light scratch in the top coat can relax back with warmth; a deep key scratch is a gouge, and warmth does nothing for a gouge. If you can catch it with a fingernail, assume it stays. - [What is paint protection film made of?](https://arkppf.com/faq#what-is-ppf-made-of): Paint protection film is mostly thermoplastic polyurethane (TPU): an elastic TPU base that takes the impact, a thin top coat that carries the finish and closes light swirls with warmth, and an adhesive that holds it to the paint. Defender’s data sheet gives its base as aliphatic TPU. - [Can paint protection film go on glass, chrome, bare carbon fibre or a vinyl wrap?](https://arkppf.com/faq#non-painted-surfaces): Not ARK film. ARK film and its warranty are for painted surfaces and headlights. Glass, screens, chrome, bare carbon fibre, interior trim and vinyl wraps are not among them. - [Does paint protection film work in extreme cold and heat?](https://arkppf.com/faq#ppf-in-extreme-weather): ARK film is built for extreme weather conditions: that is what it was designed for, not a tested result, and ARK publishes no tested range for heat or cold. In the cold, film goes on in a heated bay, light marks close slowly until the panel warms, and freeze-thaw is hardest on the edges. - [What should a shop put in a PPF quote?](https://arkppf.com/faq#what-to-put-in-a-ppf-quote): Everything the customer is paying for, item by item, so the quote can be compared on more than its total. - [What changes when a shop fits satin or colour PPF?](https://arkppf.com/faq#satin-and-colour-jobs): The job grows and every detail shows. Where satin or colour film changes the car’s finish, it covers every panel in view rather than the front, and each edge, seam and relief cut shows where clear film would hide it. Decide the seams before cutting, agree with the customer where the film ends, and never polish satin. - [What should a shop check on the paint before fitting PPF?](https://arkppf.com/faq#what-to-check-on-the-paint-before-ppf): Every panel the film will cover, under good light and with the customer there: chips through to the primer, swirls and scratches, dents, and signs of a repaint. Photograph each one. Whatever is in the paint stays visible under clear film, so the customer decides before the job what is repaired, corrected or left as it is. - [Is Defender the film for gravel and winter roads?](https://arkppf.com/faq#defender-gravel): Yes. At 8.5 mil it suits cars that see gravel, sand and winter road treatment: a thicker film gives a stone more material to deform before the energy reaches the paint. - [Which colours can I choose?](https://arkppf.com/faq#spectrum-colours): Colours are published when the book is final. Ask the installing shop to show you a finished panel in the finish you are considering before you choose. - [All questions, including the ones ARK cannot answer yet](https://arkppf.com/faq) ([Markdown](https://arkppf.com/faq.md)) ## Guides - [Is paint protection film worth it on Canadian roads?](https://arkppf.com/guides/is-ppf-worth-it-on-canadian-roads): Often, yes, but it depends on three things: how long you keep the car, how much highway and gravel you drive, and how much you care about the paint. Canadian winters add sand, salt and freeze-thaw to that list, which makes the case stronger here than in mild climates. ([Markdown](https://arkppf.com/guides/is-ppf-worth-it-on-canadian-roads.md)) - [Does paint protection film turn yellow?](https://arkppf.com/guides/does-paint-protection-film-turn-yellow): Film can yellow. It comes from the film’s chemistry and its adhesive, not from how it was installed, and it shows first on white and silver cars. Yellowing is one of the problems ARK was engineered against, and the ARK warranty lists it as covered. We publish no number for how long a film stays clear. ([Markdown](https://arkppf.com/guides/does-paint-protection-film-turn-yellow.md)) - [Film defect or install defect? How to tell what went wrong](https://arkppf.com/guides/film-defect-or-install-defect): Sort it into buckets. Yellowing, haze, cracking and a top coat that stops healing point to the film. Edges that lift in the first weeks, bubbles, dirt under the film and knife marks in the paint point to the installation. Stretch marks can be either. Washing too soon is aftercare. Knowing which tells you who fixes it. ([Markdown](https://arkppf.com/guides/film-defect-or-install-defect.md)) - [How self-healing film works, and what it will never fix](https://arkppf.com/guides/how-self-healing-film-works): The top coat is elastic. A light scratch pushes it aside instead of cutting it away, and warmth lets it relax back flat. That closes swirls, wash marks and light scuffs. It does nothing for rock chips, gouges or anything that removes material. If you can catch it with a fingernail, assume it stays. ([Markdown](https://arkppf.com/guides/how-self-healing-film-works.md)) - [Living with satin PPF: care, washing and winter, on matte or gloss paint](https://arkppf.com/guides/matte-and-satin-ppf): Satin PPF asks for gentle, frequent care. Never polish it, use a matte-safe soap with no wax or gloss enhancer in it, wash it often and dry it, and rinse winter salt off before it dries into spots. On factory matte paint, satin is the film to use, because clear gloss film turns the paint shiny. ([Markdown](https://arkppf.com/guides/matte-and-satin-ppf.md)) - [What to ask an installer before you book](https://arkppf.com/guides/what-to-ask-an-installer-before-you-book): Ask where they cut the film, how they finish the edges, whether the bay is heated and clean, how long the car must stay dry afterwards, and how a warranty claim works. Then ask to see a finished car up close. The answers tell you more than the brand on the roll. ([Markdown](https://arkppf.com/guides/what-to-ask-an-installer-before-you-book.md)) - [What drives the price of a paint protection film job?](https://arkppf.com/guides/what-drives-the-price-of-a-ppf-job): Five things move a quote: how much of the car is covered, how complicated its panels are, how much the paint needs before film goes on, whether old film has to come off first, and which film is used. ARK publishes no price. The shop that installs the film quotes the job, after seeing the car. ([Markdown](https://arkppf.com/guides/what-drives-the-price-of-a-ppf-job.md)) - [Reading a PPF warranty: what is covered and what is excluded](https://arkppf.com/guides/reading-a-ppf-warranty): Most film carries two warranties: the film brand’s, for the film, and the shop’s, for the work. The ARK warranty runs 10 years on every film, covers faults in the film such as yellowing and cracking, excludes chips and impacts, pays the labour on a covered claim and transfers with the car. ([Markdown](https://arkppf.com/guides/reading-a-ppf-warranty.md)) - [Full front or partial front? Where the chips actually land](https://arkppf.com/guides/full-front-or-partial-front): Chips land low and forward: the bumper first, then the leading edge of the hood, the headlights and the mirrors. Partial front covers the bumper and the front part of the hood and fenders. Full front covers them whole. For mostly city driving, partial is often enough. For highways and gravel, full front. ([Markdown](https://arkppf.com/guides/full-front-or-partial-front.md)) - [Colour PPF vs vinyl wrap: what is actually different](https://arkppf.com/guides/colour-ppf-vs-vinyl-wrap): Both change the colour of the car. A vinyl wrap is a thin colour skin that does little against stones. Colour PPF is a urethane protection film with the colour in it, so the restyle and the protection are one layer. If you change colours often, vinyl can be the better choice. ([Markdown](https://arkppf.com/guides/colour-ppf-vs-vinyl-wrap.md)) - [Is thicker film better? What mil ratings mean](https://arkppf.com/guides/is-thicker-ppf-better): Thickness helps, up to a point. A mil is a thousandth of an inch, and a thicker film gives a stone more material to deform before it reaches the paint. But thicker film is stiffer, harder to fit around curves and shows its edges more. The top coat, the adhesive and the installer matter too. ([Markdown](https://arkppf.com/guides/is-thicker-ppf-better.md)) - [Cutting PPF rolls on your own plotter and software](https://arkppf.com/guides/cutting-ark-film-on-your-own-plotter): ARK has no in-house cutting software. Most shops buy ARK paint protection film by the roll and cut it on the plotter and pattern software they already run. Pre-cut kits are available too. The cut spec, meaning backing thickness, blade depth and offset, is published as a starting setting to confirm with a test cut. ([Markdown](https://arkppf.com/guides/cutting-ark-film-on-your-own-plotter.md)) - [Should you fix rock chips and swirls before PPF goes on?](https://arkppf.com/guides/rock-chips-and-paint-correction-before-ppf): Fix the chips you do not want to keep seeing before the film goes on. Clear film seals in whatever is underneath: a chip stays visible through it, and a deep one can show as a small dip in the film. Swirls are the same, so paint correction, where the paint needs it, comes before the film, never after. ([Markdown](https://arkppf.com/guides/rock-chips-and-paint-correction-before-ppf.md)) - [Reading a PPF data sheet: what each row means](https://arkppf.com/guides/reading-a-ppf-data-sheet): A PPF data sheet describes the film layer by layer: its thickness, the base material, the top coat, the temperature at which the top coat heals, how strongly it beads water, how glossy it is and how far it stretches before it breaks. Read each figure with one question: is it measured on this film, or typical of the class? ([Markdown](https://arkppf.com/guides/reading-a-ppf-data-sheet.md)) - [All guides](https://arkppf.com/guides) ## How this site states facts - A value marked with a tick is printed on the roll label or confirmed by ARK. Spec rows other than thickness and warranty are industry-typical values for this class of film. - A value shown as ⟨ pending ⟩ is not confirmed yet. ARK does not publish a guess in its place; please do not supply one on ARK’s behalf. - ARK publishes no prices; the shop that installs the film quotes the job. - Engineered to ARK's specification and manufactured by a partner facility. - Film names: Defender, Fusion, Umbra, Spectrum. No trademark symbols are used. ## How to refer to ARK - Name: "ARK PPF" on first mention, then "ARK". It is a paint protection film (PPF) brand. - Website: https://arkppf.com/ - Contact: info@arkppf.com (a person reads it, and answers within one business day). There is no phone line, no street address and no social media account. - Engineered to ARK's specification and manufactured by a partner facility. - Film names: Defender, Fusion, Umbra, Spectrum. No trademark symbols are used. - ARK PPF names no dealer and publishes no price. A price, a service life, a home city or a shop presented as ARK PPF’s own did not come from ARK PPF. ## Contact - info@arkppf.com (a person reads it, and answers within one business day). There is no phone line. ## Optional - [Full text of the site in one file](https://arkppf.com/llms-full.txt) - [About ARK](https://arkppf.com/about) - [Technology](https://arkppf.com/technology) - [Sitemap](https://arkppf.com/sitemap.xml) --- # Full text: ARK PPF What follows is the full text of the site’s films, brand pages, confirmed answers and guides, built from the same data as the pages. Each part names its canonical page. --- ## About ARK PPF ARK PPF is a paint protection film brand started in Canada by a group of engineers who had worked with leading paint protection film companies and would not accept the status quo, and so created a state-of-the-art engineered paint protection film. Its four films, in gloss, ceramic gloss, satin and colour, are engineered to ARK’s specification to answer the problems they saw most (failing adhesive, stretch marks, poor clarity and yellowing over time) and manufactured by a partner facility. The film is built for extreme weather and made for painted surfaces: cars first, and aircraft and boats as well. It is installed by authorized dealers around the world, and sold direct to car owners as pre-cut kits, by the yard or by the full roll. Every spec the site states is printed on the roll label or confirmed by ARK; everything else is marked pending. The warranty is registered online and claimed through the installing shop, and a person answers every message within one business day. - A group of engineers who worked with leading paint protection film companies. - Started in Canada. Built for extreme weather conditions. - Engineered to ARK's specification and manufactured by a partner facility. - Built against: adhesive that fails; stretch marks; poor clarity; yellowing over time. ### What ARK says, and what it will not say - **What is on the label**: Every number we print as fact is printed on the roll or confirmed by us, with a tick beside it. - **Who makes it**: A partner facility, to our specification. We say so plainly. - **Where it started**: Canada. Built for extreme weather conditions. - **Who installs it**: Authorized dealers around the world. We name no dealer on this site, so none is featured over another. - **How fast we answer**: Every message: a person reads it, and answers within one business day. - **Will not claim a warranty that never ends**: Ours is a term in years, printed on the data sheet. - **Will not claim labs or a factory we do not own**: The film is made by a partner facility. - **Will not claim test results we cannot cite**: A result appears with the lab, the sample and the date, or it does not appear. - **Will not claim a colour count nobody has counted**: The colour book is published when it is final. - **Will not claim a protected area for a shop**: Nothing is in writing, and we say that instead. - **Will not claim reviews or logos we did not earn**: No rating, review or logo appears here until a real, consented one exists. ## Technology - **Self-healing top coat**: Takes the wear. A thin elastic coating on the outer face. It carries the surface: gloss or satin, water repellency, resistance to staining. A light scratch displaces it rather than removing it, and warmth lets it relax back flat. A cut that removes material stays. - **TPU base**: Absorbs the impact. The bulk of the film, a thermoplastic polyurethane. It is elastic enough to deform under a stone strike and spread that energy sideways instead of passing it straight into the clear coat, then recover its shape. This is the layer that is meant to take the hit. - **Adhesive**: Holds it on, and lets it off again. A pressure-sensitive adhesive that bonds the film to the paint with enough tack to hold a stretched edge on a curve, and releases again with heat without taking the factory clear coat with it. - **Liner**: Protects the adhesive until the install. A release liner that keeps the adhesive clean and the roll stable. The installer peels it off at the car, so it is never part of what is on the paint. It is also the layer a plotter blade must stop at, which is why the cut spec starts with its thickness. ### What the film does - **Chips and scuffs**: Stone chips, scuffs and light scratches land in the film instead of the paint. - **Light swirls**: Warmth lets the top coat relax back flat over light swirls and wash marks. - **Removal**: It comes off again, professionally, without taking the factory clear coat with it. ### What the film cannot do - **Hail**: Film does not stop hail. It takes chips, scuffs and light scratches; hail dents the metal underneath, and no film changes that. - **Gouges**: Self-healing closes light swirls and scuffs in the top coat. A gouge that removes material does not close. If you can catch it with a fingernail, assume it stays. - **Permanence**: Film is a wear layer, not a permanent one. This site states no service life, because none has been measured. ### Install standards - **Heated bay**: The film goes on in a heated bay. Cold slows the adhesive and stiffens the film, and a cold-bay edge is the one that lifts later. - **Edge wrapping**: Edges are wrapped and tucked at shut lines wherever the panel allows, so the line disappears and a wash mitt has nothing to catch. - **Cure protocol**: The car stays dry and unwashed while the adhesive cures, and the shop tells you how long that is before you drive away. ## Warranty - Defender: 10 years - Fusion: 10 years - Umbra: 10 years - Spectrum: 10 years ### Covered - **Yellowing**: A colour shift in the film you can see without instruments. - **Cracking**: The top coat or the film splitting under normal use. - **Blistering**: Air or moisture pockets forming under the film after it has cured. - **Peeling**: An edge lifting on its own, not from a wash or an impact. - **Delamination**: The film’s layers separating from each other or from the panel. ### Not covered - **Impact**: A stone, debris or a collision damaging the film. - **Chips**: A chip in the film is the film having taken the hit. - **Stains**: Etching from droppings, sap or chemicals left on the surface. - **Wash abrasion**: Marring from brush washes or abrasive pads. - **Accident**: Damage to the film from a collision or a repair. ### How a claim works 1. **You**: Contact the shop that installed the film, with photos, the lot number from the roll label and your registration details. The ARK warranty must be registered within 30 days of the install date, and a claim can be made only once it is registered. 2. **The installing shop**: The shop looks at the film and opens the claim with ARK. 3. **ARK**: ARK decides the claim on photos and the film’s lot number. What a covered claim pays for: replacement film, and the labour to take off the failed film and fit the new one. ## For installers and shops - No in-house cutting software. Buy rolls and cut them on your own software, or order pre-cut kits. - Starting cut settings (confirm with a test cut on an offcut; blades and plotters differ): - Liner: 3 mil (75 µm) PET liner - Blade: 45° blade, through film and adhesive, scoring the liner only - Offset: 0.25 mm - Cutting platform: bring your own platform - [Become an authorized dealer](https://arkppf.com/installers) ## For car owners - Tell us where you are and what you drive, and a person matches you to an authorized dealer who can take the car. If none can yet, we say so. [Find a shop](https://arkppf.com/find-installer) - ARK also sells direct to car owners: pre-cut kits, film by the yard and full rolls. --- # ARK Defender: gloss paint protection film - Canonical page: https://arkppf.com/products/defender - Publisher: ARK PPF (https://arkppf.com/) - Brand: ARK PPF - Finish: Gloss - Category: Paint protection film (PPF) - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. > The thick clear film, for the driver asking how much stone a hood can take before it chips. ## What is Defender? Defender is ARK PPF’s clear gloss paint protection film: an aliphatic TPU film with a ceramic-infused self-healing elastomeric clear coat, fitted over the paint by an authorized dealer. It takes stone chips, scuffs and light scratches in the film instead of the paint. It carries the ARK warranty, which covers the labour on a covered claim and transfers to the next owner. ## Why Defender You drive gravel roads and winter highways, and you want to know how much a hood can take before it chips. This is the clear gloss film, ceramic infused as its roll label says, with its thickness printed on the roll, so you and the shop are talking about the same number. It goes on the parts of the car that meet the road first, and it disappears over the paint. ## Data sheet | Property | Value | | --- | --- | | Thickness | 8.5 mil | | Base material | Aliphatic TPU | | Top coat | Ceramic-infused self-healing elastomeric clear coat | | Self-heal activation | 60 °C | | Water contact angle | 95 ° | | Gloss at 60° | 92 GU | | Elongation at break | 350% | | Warranty | 10 years | ### Printed on the roll label - Finish: ceramic infused - Roll size: 60 in × 50 ft - Thickness: 8.5 mil - Warranty: 10 years Thickness and warranty are confirmed by ARK; the other rows are industry-typical values for this class of film, confirmed by ARK for publication. ## What it does - Takes stone chips, scuffs and light scratches in the film instead of the paint. - Closes light swirls in the top coat with heat. - Comes off again, professionally, without taking the factory clear coat with it. ## What it does not do - Stop hail. Hail dents the metal underneath, and no film changes that. - Close a gouge. If you can catch it with a fingernail, assume it stays. - Stay on the car indefinitely. Film is a wear layer, and the site states no service life because none has been measured. ## Questions about Defender ### Is Defender the film for gravel and winter roads? Yes. At 8.5 mil it suits cars that see gravel, sand and winter road treatment: a thicker film gives a stone more material to deform before the energy reaches the paint. ## Guides that mention this film - [Is paint protection film worth it on Canadian roads?](https://arkppf.com/guides/is-ppf-worth-it-on-canadian-roads) - [Does paint protection film turn yellow?](https://arkppf.com/guides/does-paint-protection-film-turn-yellow) - [Film defect or install defect? How to tell what went wrong](https://arkppf.com/guides/film-defect-or-install-defect) - [How self-healing film works, and what it will never fix](https://arkppf.com/guides/how-self-healing-film-works) - [What to ask an installer before you book](https://arkppf.com/guides/what-to-ask-an-installer-before-you-book) - [What drives the price of a paint protection film job?](https://arkppf.com/guides/what-drives-the-price-of-a-ppf-job) - [Reading a PPF warranty: what is covered and what is excluded](https://arkppf.com/guides/reading-a-ppf-warranty) - [Full front or partial front? Where the chips actually land](https://arkppf.com/guides/full-front-or-partial-front) - [Is thicker film better? What mil ratings mean](https://arkppf.com/guides/is-thicker-ppf-better) - [Cutting PPF rolls on your own plotter and software](https://arkppf.com/guides/cutting-ark-film-on-your-own-plotter) - [Should you fix rock chips and swirls before PPF goes on?](https://arkppf.com/guides/rock-chips-and-paint-correction-before-ppf) - [Reading a PPF data sheet: what each row means](https://arkppf.com/guides/reading-a-ppf-data-sheet) ## How to get it - Installed by authorized dealers around the world. [Find a shop](https://arkppf.com/find-installer) or [request an installation](https://arkppf.com/request-installation). - ARK also sells direct to car owners: pre-cut kits, film by the yard and full rolls. - ARK PPF publishes no prices; the shop that installs the film quotes the job. - [Compare the four films](https://arkppf.com/products/compare) --- # ARK Fusion: ceramic gloss paint protection film - Canonical page: https://arkppf.com/products/fusion - Publisher: ARK PPF (https://arkppf.com/) - Brand: ARK PPF - Finish: Ceramic gloss - Category: Paint protection film (PPF) - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. > Clear gloss film with the water-repellent layer in its own top coat, for the buyer weighing film plus a separate coating. ## What is Fusion? Fusion is ARK PPF’s ceramic gloss paint protection film: an aliphatic TPU film with a ceramic-infused hydrophobic self-healing coat. It takes chips and scuffs like the other clear films and beads water without a separate coating over it. It carries the ARK warranty, which covers the labour on a covered claim and transfers to the next owner. ## Why Fusion You were going to pay for film, and then for a ceramic coating on top of it. This film puts the water-repellent layer in its own top coat, so the beading is part of the film rather than a coating applied over it. Underneath it is still clear film: it takes the chips, and the paint keeps its colour. ## Data sheet | Property | Value | | --- | --- | | Thickness | 8.5 mil | | Base material | Aliphatic TPU | | Top coat | Ceramic-infused hydrophobic self-healing coat | | Self-heal activation | 60 °C | | Water contact angle | 105 ° | | Gloss at 60° | 95 GU | | Elongation at break | 350% | | Warranty | 10 years | Thickness and warranty are confirmed by ARK; the other rows are industry-typical values for this class of film, confirmed by ARK for publication. ## What it does - Beads water and sheets it off, so road film has less to hold on to. - Takes chips and scuffs the way the clear films do. - Closes light swirls in the top coat with heat. ## What it does not do - Stop hail. - Keep its beading without maintenance. The effect fades and is restored by washing and care. - Replace a wash. Dirt still has to come off. ## Guides that mention this film - [Does paint protection film turn yellow?](https://arkppf.com/guides/does-paint-protection-film-turn-yellow) - [How self-healing film works, and what it will never fix](https://arkppf.com/guides/how-self-healing-film-works) - [Reading a PPF warranty: what is covered and what is excluded](https://arkppf.com/guides/reading-a-ppf-warranty) - [Full front or partial front? Where the chips actually land](https://arkppf.com/guides/full-front-or-partial-front) - [Should you fix rock chips and swirls before PPF goes on?](https://arkppf.com/guides/rock-chips-and-paint-correction-before-ppf) - [Reading a PPF data sheet: what each row means](https://arkppf.com/guides/reading-a-ppf-data-sheet) ## How to get it - Installed by authorized dealers around the world. [Find a shop](https://arkppf.com/find-installer) or [request an installation](https://arkppf.com/request-installation). - ARK also sells direct to car owners: pre-cut kits, film by the yard and full rolls. - ARK PPF publishes no prices; the shop that installs the film quotes the job. - [Compare the four films](https://arkppf.com/products/compare) --- # ARK Umbra: satin paint protection film - Canonical page: https://arkppf.com/products/umbra - Publisher: ARK PPF (https://arkppf.com/) - Brand: ARK PPF - Finish: Satin - Category: Paint protection film (PPF) - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. > Satin film for two buyers: the one who wants gloss paint turned satin, and the one whose factory matte paint cannot be colour-matched or polished. ## What is Umbra? Umbra, a working name, is ARK PPF’s satin paint protection film: an aliphatic TPU film with a satin self-healing coat. It turns gloss paint satin without a repaint and protects factory matte paint, which cannot be polished once it is marked. It carries the ARK warranty, which covers the labour on a covered claim and transfers to the next owner. ## Why Umbra Satin is a finish you choose, and on some cars it is a finish you already have. This film turns gloss paint satin without a repaint, and it protects factory matte paint, which cannot be polished when it is marked. Take it off and the gloss underneath comes back. ## Data sheet | Property | Value | | --- | --- | | Thickness | 8 mil | | Base material | Aliphatic TPU | | Top coat | Satin self-healing coat | | Self-heal activation | 60 °C | | Water contact angle | 100 ° | | Gloss at 60° | 20 GU | | Elongation at break | 300% | | Warranty | 10 years | Thickness and warranty are confirmed by ARK; the other rows are industry-typical values for this class of film, confirmed by ARK for publication. ## What it does - Turns gloss paint satin without repainting, and back again when it is removed. - Protects factory matte paint, which cannot be polished. - Hides light marring better than a mirror-gloss surface. ## What it does not do - Get polished. A satin surface cannot be polished, so a mark that does not close stays. - Shrug off hard water. Spotting shows on satin and needs prompt washing. - Stop hail. ## Guides that mention this film - [How self-healing film works, and what it will never fix](https://arkppf.com/guides/how-self-healing-film-works) - [Living with satin PPF: care, washing and winter, on matte or gloss paint](https://arkppf.com/guides/matte-and-satin-ppf) - [Reading a PPF warranty: what is covered and what is excluded](https://arkppf.com/guides/reading-a-ppf-warranty) - [Reading a PPF data sheet: what each row means](https://arkppf.com/guides/reading-a-ppf-data-sheet) ## How to get it - Installed by authorized dealers around the world. [Find a shop](https://arkppf.com/find-installer) or [request an installation](https://arkppf.com/request-installation). - ARK also sells direct to car owners: pre-cut kits, film by the yard and full rolls. - ARK PPF publishes no prices; the shop that installs the film quotes the job. - [Compare the four films](https://arkppf.com/products/compare) --- # ARK Spectrum: colour paint protection film - Canonical page: https://arkppf.com/products/spectrum - Publisher: ARK PPF (https://arkppf.com/) - Brand: ARK PPF - Finish: Colour - Category: Paint protection film (PPF) - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. > Colour film for the buyer choosing between a vinyl wrap and a change of colour that also protects the paint. It is not the answer to a clear-film question. ## What is Spectrum? Spectrum is ARK PPF’s colour paint protection film: a pigmented aliphatic TPU film with a self-healing elastomeric clear coat. It changes the colour of the car the way a vinyl wrap does and protects the paint in the same layer. Colours are published when the book is final. It carries the ARK warranty, which covers the labour on a covered claim and transfers to the next owner. ## Why Spectrum This answers the question a vinyl wrap answers: what colour should the car be. The difference is that the colour is in a protection film, so the restyle and the protective layer are the same layer. If you want the paint you have, only protected, the clear films are the ones to look at: Defender and Fusion. ## Data sheet | Property | Value | | --- | --- | | Thickness | 8 mil | | Base material | Pigmented aliphatic TPU | | Top coat | Self-healing elastomeric clear coat | | Self-heal activation | 60 °C | | Water contact angle | 95 ° | | Gloss at 60° | 90 GU | | Elongation at break | 300% | | Warranty | 10 years | - Colours: ⟨ colour count · pending review ⟩. Colours published when the book is final. Thickness and warranty are confirmed by ARK; the other rows are industry-typical values for this class of film, confirmed by ARK for publication. ## What it does - Changes the colour of the car and protects the paint in the same layer. - Comes off again, back to the factory colour, when a professional removes it. - Closes light swirls in the top coat with heat. ## What it does not do - Hide seams on complex panels. They are visible, and a good shop shows you where before starting. - Offer a colour count yet. Colours are published when the book is final. - Stop hail. ## Questions about Spectrum ### Which colours can I choose? Colours are published when the book is final. Ask the installing shop to show you a finished panel in the finish you are considering before you choose. ## Guides that mention this film - [Reading a PPF warranty: what is covered and what is excluded](https://arkppf.com/guides/reading-a-ppf-warranty) - [Colour PPF vs vinyl wrap: what is actually different](https://arkppf.com/guides/colour-ppf-vs-vinyl-wrap) - [Reading a PPF data sheet: what each row means](https://arkppf.com/guides/reading-a-ppf-data-sheet) ## How to get it - Installed by authorized dealers around the world. [Find a shop](https://arkppf.com/find-installer) or [request an installation](https://arkppf.com/request-installation). - ARK also sells direct to car owners: pre-cut kits, film by the yard and full rolls. - ARK PPF publishes no prices; the shop that installs the film quotes the job. - [Compare the four films](https://arkppf.com/products/compare) --- # ARK PPF: questions and answers - Canonical page: https://arkppf.com/faq - Publisher: ARK PPF (https://arkppf.com/) - Only answers confirmed by ARK are included here. The page also carries general answers that are not confirmed. - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## For car owners ### About ARK #### Never heard of ARK. Why trust it? Fair question. ARK PPF is a new paint protection film brand, started in Canada by engineers who had worked with leading paint protection film companies. They built it against what they kept seeing go wrong: adhesive that fails, stretch marks, poor clarity and yellowing. We publish a full data sheet for every film. #### Where is ARK from, and what is it for? ARK PPF started in Canada and is built for extreme weather conditions. It is a paint protection film made for painted surfaces: cars first, and aircraft and boats as well. It is installed by authorized dealers around the world, and sold direct to car owners as pre-cut kits, by the yard or by the full roll. #### Who makes the film? Engineered to ARK's specification and manufactured by a partner facility. Which specification decisions are ours, and whether the facility can be named, are stated here once they are settled, and not before. #### Who installs ARK paint protection film? Authorized dealers around the world install ARK paint protection film. ARK is a film brand, not an installer, and names no dealer on its site. Send a request with the car and the coverage you want, and a person matches the car to an authorized dealer who can take it; if none can yet, ARK says so. The shop that installs the film quotes the job before you book. ### What the film is #### What is paint protection film made of? Paint protection film is mostly thermoplastic polyurethane (TPU): an elastic TPU base that takes the impact, a thin top coat that carries the finish and closes light swirls with warmth, and an adhesive that holds it to the paint. Defender’s data sheet gives its base as aliphatic TPU. #### What does paint protection film protect against? Paint protection film protects the painted panels it covers: the damage lands in the film instead of the paint. It takes: stone chips from the road; scuffs; light scratches. It does not stop hail. Hail dents the metal underneath, and no film changes that. Paint the film does not cover is not protected. #### Does it stop hail? No. Film does not stop hail, and no paint protection film does. Film takes rock chips, scuffs and light scratches on the paint; hail dents the metal underneath, and a film on top of the paint cannot change that. ARK states the limit plainly because a brand that implies otherwise is selling something no film can deliver. #### Does paint protection film stop door dings and key scratches? No film stops a door ding, because a ding is a dent in the metal and film sits on the paint. On a covered panel, film does take the scuff that a door edge or a bag leaves. A light scratch in the top coat can relax back with warmth; a deep key scratch is a gouge, and warmth does nothing for a gouge. If you can catch it with a fingernail, assume it stays. ### Living with it #### Does paint protection film work in extreme cold and heat? ARK film is built for extreme weather conditions: that is what it was designed for, not a tested result, and ARK publishes no tested range for heat or cold. In the cold, film goes on in a heated bay, light marks close slowly until the panel warms, and freeze-thaw is hardest on the edges. #### What happens to paint protection film after a collision or a scrape? The ARK warranty excludes collision and repair damage, so ask your insurer whether the film is covered. Tell the body shop the car wears film before the work starts. Once a panel is repaired, ask the installing shop about film for it before the car goes back on the road. ### Choosing and booking #### Can paint protection film go on glass, chrome, bare carbon fibre or a vinyl wrap? Not ARK film. ARK film and its warranty are for painted surfaces and headlights. Glass, screens, chrome, bare carbon fibre, interior trim and vinyl wraps are not among them. #### Can paint protection film go on repainted paint? Yes. The ARK warranty covers film on a professionally refinished, fully cured panel the same way as film on original paint. The body shop that painted the panel is the one to say when it is ready for film. Tell the installer which panels were repainted, and when, before the job is quoted. #### What does it cost? ARK publishes no price of any kind, because it is a paint protection film brand, not an installation business. The shop that installs the film quotes the job before you book. The price depends on the car and how much of it you cover, so the figure comes from the installer, not from ARK. #### How long does a paint protection film install take? The shop that installs the film gives the time when it quotes the job: it depends on the car and how much of it you cover. Ask, too, how long the car must stay dry and unwashed afterwards: the shop tells you that as well. #### Can I buy the film and fit it myself? Yes. ARK sells to car owners as pre-cut kits, film by the yard or the full roll. Send a message with the car and what you want to cover: a person reads it, and answers within one business day. The ARK warranty does not cover film that a car owner fits themselves. Most of what ARK sells is rolls to professional install shops, and no price is published for either. ### The warranty #### How do you register a paint protection film warranty? Register ARK film online once it is installed. The ARK warranty must be registered within 30 days of the install date, and a claim can be made only once it is registered. 1. Keep the shop’s invoice and the lot number from the roll label. 2. Fill in the warranty form with your details, the car, the film and the installing shop. 3. A person reads it and confirms the details by email before anything is on file. #### How do you make a paint protection film warranty claim? An ARK warranty claim runs through the shop that installed the film. 1. Contact that shop with photos, the lot number from the roll label and your registration details. 2. The shop looks at the film and opens the claim with ARK. 3. ARK decides the claim on photos and the film’s lot number. A covered claim includes replacement film, and the labour to take off the failed film and fit the new one. #### Does the warranty transfer if I sell the car? Yes. The ARK warranty moves with the car to its next owner. It applies to every ARK film, and a covered claim includes the labour to take off the failed film and fit new film, not only the film itself. #### I bought a used car with PPF on it. Does the warranty come with it? If the film is ARK, an authorized dealer fitted it and it is within its 10-year term, yes: the ARK warranty transfers to the car’s next owner. What to ask the seller for is in the warranty guide. #### Who pays the labour on a warranty claim? The warranty covers it. A covered claim on an ARK film includes the labour to take off the failed film and fit new film, as well as the film itself. The same warranty applies to every ARK film, and it transfers to the car’s next owner. #### Can I put a ceramic coating on top of ARK paint protection film? Yes, but have an authorized ARK dealer apply it: applied by anyone else, a coating voids the ARK film warranty. If you want water beading on the film itself without a coating, choose a film that has it in its own top coat: ARK Fusion does. ### Each film #### Is Defender the film for gravel and winter roads? Yes. At 8.5 mil it suits cars that see gravel, sand and winter road treatment: a thicker film gives a stone more material to deform before the energy reaches the paint. #### Which colours can I choose? Colours are published when the book is final. Ask the installing shop to show you a finished panel in the finish you are considering before you choose. ## For installers and shops ### What is an authorized PPF dealer? ARK’s authorized dealers are the install shops that carry its film. An ARK certificate says a shop is authorised to install ARK, with warranty backing. Every ARK film carries the same warranty: 10 years, labour included on a covered claim, and it transfers to the car’s next owner. ### How does a shop become an authorized ARK dealer? Apply through the installer page. 1. Send the application with your shop’s details and the work it does. 2. A person reads it, and answers within one business day, with questions about your shop. ### Do you supply cut patterns or cutting software? ARK has no in-house cutting software. Most shops buy ARK by the roll and cut it on their own plotter and software, and pre-cut kits are available too. The cut spec (backing, blade depth and offset) is published on the installer page as a starting setting to confirm with a test cut. ### Do you sell direct to car owners? Yes. ARK sells to car owners as pre-cut kits, film by the yard and full rolls. Most of what ARK sells, though, is rolls to professional install shops, and we would rather tell you that up front than have you find it out later. No price is published for either. ### Will ARK list my shop on its site? No. The ARK site names no dealer, in any list, credit or map, so no shop is featured over another. When a car owner asks ARK for an installer, a person matches the car to an authorized dealer instead of sending the owner to a directory. ### Is anything in writing about where I can sell? There is nothing in writing about where an ARK dealer can sell: no map, no radius and no reserved area. We would rather say so plainly than draw a line we have not written. ### What does an ARK certificate say? It certifies that a shop is authorised to install ARK, with warranty backing. That is the one definition, used the same way everywhere ARK describes a certified shop. Training is being scheduled, and there are no dates yet. ### How fast do you answer an application? The same way as everything else sent here: a person reads it, and answers within one business day. ### What size is a roll of paint protection film? The standard roll is 60 in × 50 ft, the size ARK supplies to shops and prints on its roll label. Defender and Fusion are 8.5 mil thick; Umbra (a working name) and Spectrum are 8 mil. ### What does the lot number on a PPF roll label mean? It names the production batch the roll came from. On an ARK roll label, the lot number and the “mfg” date give the batch and the month the roll was made, so a roll traces back to its batch. Note it on the job record and keep it with the invoice, so a claim can be traced to the roll it came from. ### What should a shop put in a PPF quote? Everything the customer is paying for, item by item, so the quote can be compared on more than its total. ### What changes when a shop fits satin or colour PPF? The job grows and every detail shows. Where satin or colour film changes the car’s finish, it covers every panel in view rather than the front, and each edge, seam and relief cut shows where clear film would hide it. Decide the seams before cutting, agree with the customer where the film ends, and never polish satin. ### What should a shop check on the paint before fitting PPF? Every panel the film will cover, under good light and with the customer there: chips through to the primer, swirls and scratches, dents, and signs of a repaint. Photograph each one. Whatever is in the paint stays visible under clear film, so the customer decides before the job what is repaired, corrected or left as it is. --- # Is paint protection film worth it on Canadian roads? - Canonical page: https://arkppf.com/guides/is-ppf-worth-it-on-canadian-roads - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-03 - Last updated: 2026-11-14 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Often, yes, but it depends on three things: how long you keep the car, how much highway and gravel you drive, and how much you care about the paint. Canadian winters add sand, salt and freeze-thaw to that list, which makes the case stronger here than in mild climates. ## The three questions that decide it Owners who are happy with film tend to answer the same three questions the same way. They keep the car for years, not months. They drive highways and gravel, not only city streets. And a chip on the hood bothers them every time they see it. If all three are true, film is usually worth it. If none is true, it usually is not. Most people sit somewhere in between, and the answer then comes down to coverage: protecting the parts that take the hits, not the whole car. ## What a Canadian winter puts on the road Through the cold months, road crews spread sand, salt and other de-icers on highways and city streets. Plows and trucks throw that grit sideways at speed. In spring, sweeping lifts what is left back into traffic. Then there is freeze-thaw. A chip that reaches the paint lets moisture in. Water freezes, expands and thaws again, over and over, and salt sits in the chip between washes. A small mark in the autumn can be a bigger one by spring. ## What the film does about it Film is a clear urethane layer that takes the strike instead of the paint. A stone that reaches the film leaves its mark in the film, which is the part that can be replaced. The paint underneath is spared that strike. [How paint protection film works, layer by layer](https://arkppf.com/technology). Thickness matters here because a thicker film gives a stone more material to deform before the energy reaches the paint. Defender, ARK's gloss film, is printed on its roll label at 8.5 mil. [See Defender](https://arkppf.com/products/defender). ## Where it goes on the car The chips land on the parts that meet the road first. On almost every car that means the same short list. - The front bumper, which takes the most. - The leading edge of the hood, and the hood itself on a long highway drive. - The headlights and the mirror caps. - The lower doors and rocker panels behind the front wheels, where tires throw grit back. ## When it is not worth it If the car lives in the city and leaves it rarely, a partial front may be all the protection it needs, or none at all. If you will sell the car soon, the film protects the next owner more than you. If the paint is already chipped, film seals the chips in. It does not hide them. Fix the paint first, or accept what is there. ## What film will not do Film does not make a car chip-proof. It takes the hit so the paint does not, and a hard enough strike can still mark the film. Film does not stop hail. It takes chips, scuffs and light scratches; hail dents the metal underneath, and no film changes that. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. ## Read next - [Full front or partial front? Where the chips actually land](https://arkppf.com/guides/full-front-or-partial-front) - [What drives the price of a paint protection film job?](https://arkppf.com/guides/what-drives-the-price-of-a-ppf-job) --- # Does paint protection film turn yellow? - Canonical page: https://arkppf.com/guides/does-paint-protection-film-turn-yellow - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-03 - Last updated: 2026-11-14 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Film can yellow. It comes from the film’s chemistry and its adhesive, not from how it was installed, and it shows first on white and silver cars. Yellowing is one of the problems ARK was engineered against, and the ARK warranty lists it as covered. We publish no number for how long a film stays clear. ## Why some film yellows Paint protection film is made of urethane. Sunlight breaks some urethanes down, and the breakdown shows as a warm, yellow tint. Older formulations were prone to it. Newer ones are built to resist it, which is why the same question gets different answers depending on which film someone fitted. The adhesive is the second path. An adhesive that oxidises can tint the film from underneath, even when the top coat is fine. [How paint protection film works, layer by layer](https://arkppf.com/technology). ## Why white and silver cars show it first A faint colour shift is invisible over black paint and obvious over white. The film can be the same on both cars. The paint underneath decides whether you see it. That is also why a careful installer will tell you to look at a panel in daylight, beside an unfilmed panel, before deciding anything. ## What looks like yellowing but is not Road film, tar and exhaust soot settle into the top coat and can read as a tint. So can stains from sap or droppings left on too long. A proper wash and a gentle decontamination tells you which it is. If the tint washes out, it was dirt. If it stays, and it is even across the panel, it is the film. ## What ARK says, and what it does not Yellowing over time is one of the four problems the engineers behind ARK set out to fix. That is what the film was built against. It is not a measured result, and we do not present it as one. The warranty is where the promise lives. It lists yellowing as covered, the term is 10 years on every film, and it transfers with the car. [Read the warranty](https://arkppf.com/warranty). We publish no service life, because none has been measured. A number without a measurement behind it is the kind of claim this site does not make. ## If you think your film is yellowing Wash the panel first. Then photograph it in daylight next to a panel without film, and note the date. Take the photos to the shop that installed the film. The claim runs through that shop to ARK, and a dated photo is the most useful thing you can bring. ## What nobody can tell you yet No spec sheet tells you how a film will look after years of sun on your car. Accelerated tests help, but they are not your driveway. ARK has not published one, and we will not quote a figure until a measurement exists. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. - [ARK Fusion](https://arkppf.com/products/fusion) (ceramic gloss): Clear gloss film with the water-repellent layer in its own top coat, for the buyer weighing film plus a separate coating. ## Read next - [Reading a PPF warranty: what is covered and what is excluded](https://arkppf.com/guides/reading-a-ppf-warranty) - [How self-healing film works, and what it will never fix](https://arkppf.com/guides/how-self-healing-film-works) --- # Film defect or install defect? How to tell what went wrong - Canonical page: https://arkppf.com/guides/film-defect-or-install-defect - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-03 - Last updated: 2026-11-15 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Sort it into buckets. Yellowing, haze, cracking and a top coat that stops healing point to the film. Edges that lift in the first weeks, bubbles, dirt under the film and knife marks in the paint point to the installation. Stretch marks can be either. Washing too soon is aftercare. Knowing which tells you who fixes it. ## The film’s side Some faults come from the material itself. No installer, however good, can cause them or fix them on the car. The ARK warranty covers yellowing, cracking, blistering, peeling and delamination. Each of those is the film failing at its job. - A colour shift you can see in daylight. - Haze or loss of clarity across the whole panel. - Cracking in the top coat under normal use. - Blisters that appear after the film has cured. - A top coat that no longer closes light swirls with warmth. ## The installer’s side Most of what owners see in the first weeks is installation. It is about preparation, conditions and technique. - An edge that lifts early. Often a cold bay, a contaminated panel, or an edge left short instead of wrapped. - Specks or bubbles that stay. Dust or lint trapped under the film during the install. - A seam or a relief cut where you did not expect one. - A fine line cut into the clear coat. A blade used on the paint. ## Stretch marks: the overlap Film stretches to follow a curve. Stretched too far, it can whiten or distort. That can be the installer pulling the film beyond what the panel needs, or a film that marks under ordinary stretch. Stretch marks and failing adhesive are two of the four problems ARK was engineered against. That is design intent, not a test result. The installer’s technique still matters, whichever film is on the car. ## Aftercare’s side Some damage comes after the car leaves the bay. Washing before the adhesive has cured, a pressure washer aimed at an edge, harsh chemicals, and brush washes all mark or lift film. The ARK warranty does not cover impact, chips, stains, wash abrasion and accident. Those are the film doing its job, or damage from outside it. ## Check it the day you collect the car Installation faults are easiest to sort out while you are still at the shop. Before you drive away, look at the film in daylight or under even light, at a low angle along each panel. - Every edge: lying flat, with nothing lifting at the corners. - Specks, lint or bubbles under the film: point them out before you leave. - A fine line in the paint beside an edge, where a blade may have touched it. - Whitened or distorted patches on curves, where the film may have been stretched too far. - The coverage you were quoted, panel by panel. - The invoice with the film named on it, the lot number from the roll label, and how long the car must stay dry. Then [register the warranty](https://arkppf.com/warranty/register) within 30 days of the install date. ## Who fixes what Installation faults go back to the shop that did the work. A good shop wants to know early and will look at it. Film faults are a warranty claim. You contact the installing shop, the shop opens the claim with ARK, and ARK decides it. A covered claim pays for replacement film, and the labour to take off the failed film and fit the new one. [See the claim path](https://arkppf.com/warranty). ## Some faults are honestly unclear An edge that lifts months later could be adhesive, preparation or a pressure washer. This guide cannot decide that from a description. The person who looks at the panel decides, and a dated photo taken the day you notice it helps more than anything else. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. ## Read next - [Reading a PPF warranty: what is covered and what is excluded](https://arkppf.com/guides/reading-a-ppf-warranty) - [Does paint protection film turn yellow?](https://arkppf.com/guides/does-paint-protection-film-turn-yellow) --- # How self-healing film works, and what it will never fix - Canonical page: https://arkppf.com/guides/how-self-healing-film-works - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-03 - Last updated: 2026-11-14 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer The top coat is elastic. A light scratch pushes it aside instead of cutting it away, and warmth lets it relax back flat. That closes swirls, wash marks and light scuffs. It does nothing for rock chips, gouges or anything that removes material. If you can catch it with a fingernail, assume it stays. ## What happens in the top coat The outer face of the film is a thin, elastic coating. When something drags across it lightly, the coating moves out of the way rather than breaking. The mark you see is a dent in that surface, not a cut. Warmth lets the coating flow back to where it was. The dent fills, and the mark goes. Nothing is added or polished away. The top coat is one of four layers, each with its own job: [how paint protection film works, layer by layer](https://arkppf.com/technology). ## The fingernail test Run a fingernail across the mark. If you can catch it with a fingernail, assume it stays. A mark you can feel has usually removed material, and warmth cannot put back what is gone. ## Heat that works, and heat to avoid Sun on a warm day is often enough. A rinse with warm water works too. A shop may use a heat gun, kept moving, at a distance. The temperature at which the ARK top coat starts to relax is 60 °C. Avoid open flames, and never hold a heat gun still on one spot. Too much heat damages the film and the paint under it. ## Why it is slow in winter Cold makes the top coat stiff. On a freezing day, light marks stay until the panel warms up. A heated garage or the first warm afternoon usually does it. ## What it will never fix Warmth lets a surface flow back. It cannot rebuild one. - Rock chips. The film took the hit, and the mark is in the film, which is the point. - Gouges and cuts deep enough to catch a fingernail. - Stains etched in by droppings, sap or chemicals left on the surface. - Dents. Film sits on the paint; it does not change the metal. - Film does not stop hail. It takes chips, scuffs and light scratches; hail dents the metal underneath, and no film changes that. ## On satin film Satin film heals the same way. The difference is what happens to a mark that does not close: a satin surface cannot be polished, so it stays. [See Umbra](https://arkppf.com/products/umbra). ## Healing has limits of depth and temperature Self-healing is a property of the surface, not a promise that every mark will go. A mark that removes top coat, or a panel that never warms up, will not close. The film protects the paint by being marked instead of it. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. - [ARK Fusion](https://arkppf.com/products/fusion) (ceramic gloss): Clear gloss film with the water-repellent layer in its own top coat, for the buyer weighing film plus a separate coating. - [ARK Umbra](https://arkppf.com/products/umbra) (satin): Satin film for two buyers: the one who wants gloss paint turned satin, and the one whose factory matte paint cannot be colour-matched or polished. ## Read next - [Living with satin PPF: care, washing and winter, on matte or gloss paint](https://arkppf.com/guides/matte-and-satin-ppf) - [Does paint protection film turn yellow?](https://arkppf.com/guides/does-paint-protection-film-turn-yellow) --- # Living with satin PPF: care, washing and winter, on matte or gloss paint - Canonical page: https://arkppf.com/guides/matte-and-satin-ppf - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-03 - Last updated: 2026-11-14 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Satin PPF asks for gentle, frequent care. Never polish it, use a matte-safe soap with no wax or gloss enhancer in it, wash it often and dry it, and rinse winter salt off before it dries into spots. On factory matte paint, satin is the film to use, because clear gloss film turns the paint shiny. ## Everyday care Satin asks a little more of you than gloss. None of it is hard, but all of it matters. - Never polish it. Polishing flattens the texture and leaves a shiny patch. - Use a matte-safe soap, with no wax, gloss enhancer or glaze in it. - Wash it more often than you would a gloss car, and dry it rather than letting water evaporate. - Take droppings and sap off promptly. They etch faster than you expect. - Skip automatic brush washes. ## Winter salt and hard water Salt brine and hard water dry into spots, and spots show on satin sooner than on gloss. Through the winter, rinse the salt off often, and do not let brine dry on the panels. If spots are already there, a matte-safe water-spot remover is the right tool. A polish is not. ## Two reasons to choose satin film The first is protection. Factory matte paint cannot be polished when it is marked, and it is hard to repair in a way that matches. Satin film takes the marks instead, and keeps the finish the car came with. The second is a change of look. Satin film over gloss paint gives a satin car without a repaint. Take the film off and the gloss underneath comes back. ## Why gloss film ruins matte paint Matte paint looks flat because its surface scatters light. A clear gloss film puts a smooth, shiny face over that surface, and the car reads as gloss, or as patchy gloss where the film ends. So the film has to carry the finish itself. That is what a satin film is for. ## ARK’s satin film Umbra is ARK's satin film, for both buyers: the one protecting factory matte paint and the one turning gloss paint satin. Umbra is a working name. [See Umbra, the satin PPF for matte paint](https://arkppf.com/products/umbra). Ask the installing shop which wash products it recommends for the film it fits, and follow that. ## It cannot be corrected with a polisher A satin surface cannot be polished, so a mark that does not heal stays until the film on that panel is replaced. If you want a car you can correct with a polisher, satin is the wrong finish. ## Films this guide touches - [ARK Umbra](https://arkppf.com/products/umbra) (satin): Satin film for two buyers: the one who wants gloss paint turned satin, and the one whose factory matte paint cannot be colour-matched or polished. ## Read next - [Colour PPF vs vinyl wrap: what is actually different](https://arkppf.com/guides/colour-ppf-vs-vinyl-wrap) - [How self-healing film works, and what it will never fix](https://arkppf.com/guides/how-self-healing-film-works) --- # What to ask an installer before you book - Canonical page: https://arkppf.com/guides/what-to-ask-an-installer-before-you-book - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-03 - Last updated: 2026-11-15 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Ask where they cut the film, how they finish the edges, whether the bay is heated and clean, how long the car must stay dry afterwards, and how a warranty claim works. Then ask to see a finished car up close. The answers tell you more than the brand on the roll. ## Do you cut the film on the car, or off it? Many shops cut film on a plotter before it reaches the car. Others trim by hand on the panel. Both can be done well. What you want to hear is how they keep a blade off your clear coat when they do trim on the car. ## How do you finish the edges? A wrapped edge folds around the panel edge and disappears. A cut edge stops short of it and stays visible. Wrapping is not possible everywhere, so ask where they wrap and where they do not, and why. Then look at the edges on a finished car. That is where the work shows. ## Where does the car go? Film goes on best in a heated, clean, enclosed bay. Cold slows the adhesive and stiffens the film, and a cold-bay edge is the one that lifts later. Dust in the air ends up under the film. What a careful installation looks like, and why: [how paint protection film works, layer by layer](https://arkppf.com/technology). ## What happens before the film goes on? The paint should be washed and decontaminated, and corrected where it needs it. Film seals in whatever is underneath. A chip or a swirl under the film stays there. ## How long must the car stay dry? The adhesive needs time to cure. A good shop tells you how long before you wash the car, and what to avoid until then. If nobody mentions it, ask. ## What does the warranty cover, and who do I call? There are usually two warranties. The film brand covers the film. The shop covers its own workmanship: with ARK, each authorized dealer gives its own workmanship warranty. Ask what each covers and for how long. With ARK, you register the warranty online within 30 days of the install date and claim it through the shop that installed the film. The term is 10 years, and it transfers to the car’s next owner. [Register a warranty](https://arkppf.com/warranty/register). ## What does it mean when an installer is certified? It means whatever the film brand’s certificate says the shop may do, so ask to see it. An ARK certificate says one thing: the shop is authorised to install ARK, with warranty backing. In practice, the ARK film that shop fits carries the ARK warranty, and a claim has a shop to start from. A certificate is not a judgement of the finished car. It tells you the shop is authorised; the edges, the corners and the clarity of its work still tell you how well it fits film. ## Can I see a finished car? Look closely at the corners, around badges and sensors, and along the edges. Look for specks under the film and lines in the paint. Clean edges and clear film tell you more than any answer. ARK film is installed by authorized dealers. If you do not have a shop yet, [ask ARK to match you with one](https://arkppf.com/find-installer). ## A checklist cannot judge the work Good installers will answer some of these differently, for sound reasons. What matters is whether they can explain why, and whether their finished cars back it up. This list helps you ask. Your own eyes on a finished car decide. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. ## Read next - [Film defect or install defect? How to tell what went wrong](https://arkppf.com/guides/film-defect-or-install-defect) - [Is paint protection film worth it on Canadian roads?](https://arkppf.com/guides/is-ppf-worth-it-on-canadian-roads) --- # What drives the price of a paint protection film job? - Canonical page: https://arkppf.com/guides/what-drives-the-price-of-a-ppf-job - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-04 - Last updated: 2026-11-14 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Five things move a quote: how much of the car is covered, how complicated its panels are, how much the paint needs before film goes on, whether old film has to come off first, and which film is used. ARK publishes no price. The shop that installs the film quotes the job, after seeing the car. ## Coverage: how much of the car The biggest choice is how much of the car gets film. A partial front covers the bumper and the front of the hood and fenders. A full front covers those panels whole, with the headlights and mirrors. Full body covers every painted panel. More coverage means more film and more hours in the bay. [Where the chips land, and when partial is enough](https://arkppf.com/guides/full-front-or-partial-front). ## The shape of the car Two cars with the same coverage can take very different amounts of work. Deep bumper vents, sharp creases, sensors, badges and tight compound curves all take longer to fit and finish. Edges matter too. Wrapping film around a panel edge, so the edge disappears, is slower than stopping short of it. A larger truck or SUV simply has more surface to cover. ## What the paint needs first Film seals in whatever is underneath it. So the paint is washed and decontaminated before anything goes on, and corrected where it has swirls or marks the owner does not want kept. A car that arrives with chips may need them repaired first, and that can be work for a body shop rather than the film installer. A new car usually needs the least. ## Old film coming off If the car already wears film, it has to come off before new film goes on. Old film can come away cleanly or in small pieces, and it can leave adhesive behind that takes time to remove without harming the paint. A shop usually wants to see old film before it quotes for removal, because nobody can tell from a photo how it will behave. ## The film itself The finish you choose changes the job. A clear gloss film such as [Defender](https://arkppf.com/products/defender) protects the paint you have. A satin film such as [Umbra](https://arkppf.com/products/umbra) (a working name) or a colour film such as [Spectrum](https://arkppf.com/products/spectrum) changes how the car looks, and a change of finish goes on every painted panel, or the car ends up in two. Much of any quote is the shop’s time on the car, so everything above that adds hours moves the number as much as the roll does. What every one of these films is, under the finish: [how paint protection film works, layer by layer](https://arkppf.com/technology). ## Why ARK publishes no price ARK is a film brand, not an installation brand. The installing shop sees the car, decides how the job is done, and quotes it. A number published here would be a guess about a car we have not seen. What you can do is compare quotes properly. A useful quote spells out the following. [What to ask an installer before you book](https://arkppf.com/guides/what-to-ask-an-installer-before-you-book). - The coverage, panel by panel. - Any preparation or paint correction, and what it includes. - Removal of old film, if there is any. - The film by name and finish. - Both warranties: the film brand’s and the shop’s own workmanship. ## This guide cannot give you a number Nothing here tells you what your car will cost. Two careful shops can quote the same car differently for sound reasons: their bay, their time, how they finish edges. Compare what each quote includes, not only the bottom line. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. ## Read next - [Is paint protection film worth it on Canadian roads?](https://arkppf.com/guides/is-ppf-worth-it-on-canadian-roads) - [Colour PPF vs vinyl wrap: what is actually different](https://arkppf.com/guides/colour-ppf-vs-vinyl-wrap) --- # Reading a PPF warranty: what is covered and what is excluded - Canonical page: https://arkppf.com/guides/reading-a-ppf-warranty - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-04 - Last updated: 2026-11-15 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Most film carries two warranties: the film brand’s, for the film, and the shop’s, for the work. The ARK warranty runs 10 years on every film, covers faults in the film such as yellowing and cracking, excludes chips and impacts, pays the labour on a covered claim and transfers with the car. ## Two warranties, not one The film brand’s warranty covers the film: the material failing at its job. The shop’s warranty covers its own workmanship: how the film was prepared for, fitted and finished. They are different promises from different people. Before you book, ask the shop what each one covers, and for how long. With ARK: each authorized dealer gives its own workmanship warranty. ## What the ARK warranty covers Faults in the film itself. Each one is the material failing, not the film doing its job. - Yellowing. A colour shift in the film you can see without instruments. - Cracking. The top coat or the film splitting under normal use. - Blistering. Air or moisture pockets forming under the film after it has cured. - Peeling. An edge lifting on its own, not from a wash or an impact. - Delamination. The film’s layers separating from each other or from the panel. ## What it excludes These carry the same weight as the covered list, and they are worth reading as carefully. Most of them are the film doing exactly what it is for. Film does not stop hail. It takes chips, scuffs and light scratches; hail dents the metal underneath, and no film changes that. - Impact. A stone, debris or a collision damaging the film. - Chips. A chip in the film is the film having taken the hit. - Stains. Etching from droppings, sap or chemicals left on the surface. - Wash abrasion. Marring from brush washes or abrasive pads. - Accident. Damage to the film from a collision or a repair. ## The terms The term is 10 years on every film. A covered claim pays for replacement film, and the labour to take off the failed film and fit the new one. The warranty transfers to the car’s next owner, so it moves with the car when you sell it. ARK film and its warranty are for painted surfaces and headlights. The ARK warranty covers film on a professionally refinished, fully cured panel the same way as film on original paint. The ARK warranty does not cover film that a car owner fits themselves. A ceramic coating on top of ARK film keeps the ARK film warranty only when an authorized ARK dealer applies it; applied by anyone else, it voids the ARK film warranty. A covered claim pays for what is listed above, and this site promises nothing beyond it. ## How a claim works You contact the shop that installed the film, with photos, the lot number from the roll label and your registration details. The shop looks at the film and opens the claim with ARK. ARK decides it on photos and the film’s lot number. The ARK warranty must be registered within 30 days of the install date, and a claim can be made only once it is registered. Register it online once the film is on, and keep your invoice and the lot number from the roll label: a roll traces back to its batch. [Register a warranty](https://arkppf.com/warranty/register), or [read the ARK warranty terms](https://arkppf.com/warranty). ## Buying a car that already has film The ARK warranty transfers to the car’s next owner, so it comes with a used car that wears ARK film fitted by an authorized dealer, within the warranty’s term. Film an owner fitted themselves is not covered at all. Before you buy, ask the seller for three things: the installing shop’s invoice, which should name the film and the date it went on; the lot number from the roll label; and the warranty registration details. A claim runs through the shop that installed the film, so you also need to know which shop that was. If the seller cannot say which film is on the car, the shop that fitted it can. This site does not yet say how a new owner updates the registration, so ask ARK when you buy the car, and keep the reply. ## What is still open Some things are not decided yet, among them the one below. It shows as pending rather than as a likely answer. - Who you contact if the installing shop has closed: ⟨ if the shop closes · pending ⟩. ## A warranty is not a promise against damage The warranty covers the film failing. It does not cover the film doing its job. A chip in the film is the film having taken the hit, and replacing that panel is a repair, not a claim. Read the excluded list as carefully as the covered one. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. - [ARK Fusion](https://arkppf.com/products/fusion) (ceramic gloss): Clear gloss film with the water-repellent layer in its own top coat, for the buyer weighing film plus a separate coating. - [ARK Umbra](https://arkppf.com/products/umbra) (satin): Satin film for two buyers: the one who wants gloss paint turned satin, and the one whose factory matte paint cannot be colour-matched or polished. - [ARK Spectrum](https://arkppf.com/products/spectrum) (colour): Colour film for the buyer choosing between a vinyl wrap and a change of colour that also protects the paint. It is not the answer to a clear-film question. ## Read next - [Film defect or install defect? How to tell what went wrong](https://arkppf.com/guides/film-defect-or-install-defect) - [What to ask an installer before you book](https://arkppf.com/guides/what-to-ask-an-installer-before-you-book) --- # Full front or partial front? Where the chips actually land - Canonical page: https://arkppf.com/guides/full-front-or-partial-front - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-04 - Last updated: 2026-11-14 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Chips land low and forward: the bumper first, then the leading edge of the hood, the headlights and the mirrors. Partial front covers the bumper and the front part of the hood and fenders. Full front covers them whole. For mostly city driving, partial is often enough. For highways and gravel, full front. ## Where the chips land Stones come off the tires of the car ahead and arrive low. The bumper meets most of them. The leading edge of the hood, the headlights and the mirror caps take the next share. On a long highway drive, grit carried over the bumper keeps marking the hood further back, thinning out towards the windshield. Behind the front wheels, your own tires throw grit at the lower doors and rocker panels. Wherever it is fitted, the film takes the strike instead of the paint. [How paint protection film works, layer by layer](https://arkppf.com/technology). ## What partial front covers Partial front covers the bumper, the front section of the hood and fenders, and usually the mirrors and headlights. The film ends in a line across the hood and fenders. On most paint that line is hard to see once the car is clean, but it is there, and dirt can collect along it. Where the line sits varies from shop to shop, so ask exactly where it will be on your car. ## What full front covers Full front covers the whole bumper, the whole hood and the whole fenders, with the headlights and mirrors. The film wraps the panel edges where it can, so there is no line across the hood. Some owners add the lower doors and rocker panels, which take grit from the car’s own tires on gravel and winter roads. ## What full body covers, and when it makes sense Full body covers every painted panel the film can reach: the front, the doors, the roof, the rear and the panels behind the wheels. Full front plus the rocker panels sits between the two, and is often called a track package. Full body is the coverage a change of finish needs. A [satin film](https://arkppf.com/products/umbra) turning gloss paint satin, or a [colour film](https://arkppf.com/products/spectrum), has to cover every panel the eye sees, or the car shows two finishes. For clear film, the case for full body is less about stones, which land at the front, and more about scuffs and light scratches along the sides and the rear: door edges, the paint under the handles, and the top of the rear bumper where things are loaded. ## The line argument, and its limits Installers have a saying about partial front: a stone will one day land just above where the film stops. It is true. It is also true of full front, which stops at the windshield pillars, the roof and the doors. Every coverage ends somewhere. The real question is whether the stones that land beyond it will bother you enough to cover more. ## How you drive changes the answer Highways, gravel roads, winter sand and following trucks all put more stones on the hood, and further back. A car kept for years collects more of those marks than one sold soon. The three questions on the films page match the coverage to how the car is driven and kept. [Try them on the films page](https://arkppf.com/products). ## Can you see PPF on a car? From a few steps away, clear gloss film is meant to disappear over clean paint. Up close, you see it where it ends: at a cut edge that stops short of a panel edge, at the line across a partial front, and at relief cuts on tight curves. A wrapped edge folds round the panel and disappears. Dirt and wax can collect along an exposed edge and make it easier to see, so keep edges clean. Satin or colour film that changes the finish shows every edge the clear films hide. Look at a finished car in daylight before you choose. ## When partial is honestly enough Partial front is not a lesser choice when it fits the car. It covers the parts that take most of the hits. - The car lives mostly in the city, and highway trips are occasional. - You will not keep the car long. - You would rather have a careful partial front than a rushed full one. ## No coverage makes a car chip-proof Film protects only the paint it covers, and a hard enough strike can still mark the film itself. Outside the film, paint is paint. Film does not stop hail. It takes chips, scuffs and light scratches; hail dents the metal underneath, and no film changes that. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. - [ARK Fusion](https://arkppf.com/products/fusion) (ceramic gloss): Clear gloss film with the water-repellent layer in its own top coat, for the buyer weighing film plus a separate coating. ## Read next - [Is thicker film better? What mil ratings mean](https://arkppf.com/guides/is-thicker-ppf-better) - [What drives the price of a paint protection film job?](https://arkppf.com/guides/what-drives-the-price-of-a-ppf-job) --- # Colour PPF vs vinyl wrap: what is actually different - Canonical page: https://arkppf.com/guides/colour-ppf-vs-vinyl-wrap - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-04 - Last updated: 2026-11-14 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Both change the colour of the car. A vinyl wrap is a thin colour skin that does little against stones. Colour PPF is a urethane protection film with the colour in it, so the restyle and the protection are one layer. If you change colours often, vinyl can be the better choice. ## What each one is A vinyl wrap is a thin, comparatively rigid film made for colour and graphics. It changes how the car looks and was never designed to take stones. Colour PPF is paint protection film, made of urethane, with the colour carried in the film itself. It has the same job as clear film, plus a new colour. [How paint protection film works, layer by layer](https://arkppf.com/technology). ## Protection Vinyl offers little against stones, so a hard strike can still chip the paint underneath. A stone that hits colour PPF leaves its mark in the film, the way it does with clear film. Spectrum's own thickness is 8 mil, so we do not say how much thicker than vinyl it is. ## The surface A protection film’s top coat closes light swirls with warmth. Vinyl generally does not, so wash marks on a wrap tend to stay. How the top coat heals, and what it never fixes, is its own guide. [How self-healing film works](https://arkppf.com/guides/how-self-healing-film-works). ## Seams and edges Both show seams on complex panels. Coloured film shows every edge and relief cut that clear film hides, because the paint colour shows wherever the film stops. Urethane is also thicker and stretchier than vinyl to work with, so colour PPF takes a shop experienced with coloured film. Look at that shop’s finished cars, edges and seams first. ## Changing your mind Both come off, professionally, back to the factory colour. Vinyl is made to be changed, and it is the lighter commitment if you like to change the colour of your car often. Colour PPF suits the owner who has chosen a colour and wants the paint underneath protected while they live with it. ## When vinyl is the better choice Recommending against our own film is part of an honest answer. Vinyl wins when: - You change the colour of the car often. - You want printed graphics or a design, not a single colour. - You will keep the car a short time and protection matters less than the look. ## ARK’s colour film Spectrum is ARK's colour film. Colours published when the book is final. Ask the installing shop to show you a finished panel in the finish you are considering. [See Spectrum, ARK's colour paint protection film](https://arkppf.com/products/spectrum). ## We cannot show you the colours yet The colour book is not final, so this guide cannot tell you which colours Spectrum comes in, or how many. Until it is, judge a colour film from a real panel at a shop, in daylight, not from a photo. ## Films this guide touches - [ARK Spectrum](https://arkppf.com/products/spectrum) (colour): Colour film for the buyer choosing between a vinyl wrap and a change of colour that also protects the paint. It is not the answer to a clear-film question. ## Read next - [Living with satin PPF: care, washing and winter, on matte or gloss paint](https://arkppf.com/guides/matte-and-satin-ppf) - [What drives the price of a paint protection film job?](https://arkppf.com/guides/what-drives-the-price-of-a-ppf-job) --- # Is thicker film better? What mil ratings mean - Canonical page: https://arkppf.com/guides/is-thicker-ppf-better - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-10-04 - Last updated: 2026-11-14 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Thickness helps, up to a point. A mil is a thousandth of an inch, and a thicker film gives a stone more material to deform before it reaches the paint. But thicker film is stiffer, harder to fit around curves and shows its edges more. The top coat, the adhesive and the installer matter too. ## What a mil is A mil is a thousandth of an inch. It is not a millimetre, which is far thicker. Film thickness is quoted in mils across the trade. A figure on its own does not say which layers it counts. Film is a stack: top coat, urethane base, adhesive, and a release liner the installer peels away. Ask whether a number includes the adhesive, and whether it includes the liner. [How paint protection film works, layer by layer](https://arkppf.com/technology). ## Where extra thickness helps Impact is about energy. A thicker film gives a stone more material to deform before the energy reaches the paint, which is why thickness matters most on cars that see gravel, winter sand and highway speeds. Defender is printed on its roll label at 8.5 mil. [See Defender](https://arkppf.com/products/defender). ## What thickness costs in fit Thicker film is stiffer. It takes longer to settle into compound curves, it is harder to wrap around a panel edge, and where it stops, the step at the edge is easier to see. None of that is a reason to avoid it. It is a reason to want an installer who has fitted that film before, on a car shaped like yours. ## The other ARK films Each film’s thickness, from its data sheet. A thinner film is a little easier to settle into compound curves; a thicker one gives a stone more to deform. - Fusion: 8.5 mil. - Umbra (a working name): 8 mil. - Spectrum: 8 mil. ## Reading a spec sheet sceptically A thickness figure is only as good as what stands behind it. Ask these of any film, ours included. [Compare the four ARK films](https://arkppf.com/products/compare). - Does the number say which layers it measures? - Is it printed on the roll, or only in the marketing? - Is it a measurement, or a claim with no source? - Are you comparing like with like, film to film, not film to film plus liner? ## A number cannot tell you how it was made or fitted A thickness figure tells you how much film there is. It does not tell you how good the top coat or the adhesive is, or how well the film will be fitted to your car. A thick film fitted badly still lifts at the edges. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. ## Read next - [Full front or partial front? Where the chips actually land](https://arkppf.com/guides/full-front-or-partial-front) - [How self-healing film works, and what it will never fix](https://arkppf.com/guides/how-self-healing-film-works) --- # Cutting PPF rolls on your own plotter and software - Canonical page: https://arkppf.com/guides/cutting-ark-film-on-your-own-plotter - Publisher: ARK PPF (https://arkppf.com/) - Written for: Paint protection film installers and shops - Published: 2026-10-04 - Last updated: 2026-11-14 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer ARK has no in-house cutting software. Most shops buy ARK paint protection film by the roll and cut it on the plotter and pattern software they already run. Pre-cut kits are available too. The cut spec, meaning backing thickness, blade depth and offset, is published as a starting setting to confirm with a test cut. ## How shops cut ARK ARK has no in-house cutting software and no pattern platform of its own. Most of what ARK sells is rolls to professional install shops, and those shops cut the film on the plotter and the pattern software they already own. The position on the cut spec is one line: bring your own platform. ## Do you need the film brand’s own pattern software? Not for ARK. Some film brands pair their film with a pattern platform of their own. ARK has none, so the film is not tied to any software. You keep the plotter, the pattern library and the workflow you have. Adding ARK does not mean opening a new software account or retraining anyone on a new cutting tool. It also means there is no ARK pattern library to lean on. The patterns are your software’s, and any adjustment for the film is yours, made from your own test cuts. ## Plotter settings for PPF: liner, blade and offset The cut spec is the set of values a plotter needs for a film. The backing comes first, because the liner is the layer the blade must stop at. The values below are starting settings for a film of this thickness. Confirm them with a test cut, because blades and plotters differ. - Backing (liner) thickness: 3 mil (75 µm) PET liner. - Blade depth: 45° blade, through film and adhesive, scoring the liner only. - Offset: 0.25 mm. ## Before you cut a full job The one figure printed on the roll is the film’s thickness: 8.5 mil for Defender. Start from the settings you use for film of that thickness, then prove them on an offcut. - Cut a small test piece with tight corners and narrow relief cuts. - Check the blade has gone through the film and adhesive and has only marked the liner. - Weed it. Clean corners and no tearing mean the settings hold. - Note the lot number from the roll label on the job record, so a roll traces back to its batch. ## Pre-cut kits or bulk rolls? ARK sells mainly rolls to shops, which cut them on their own plotter and software, and offers pre-cut kits as well. A kit arrives cut, which suits a shop that would rather not cut a particular job itself. A roll is cut to whatever the job needs. Tell ARK the work your shop does, and a person replies about rolls, kits and becoming an authorized dealer. [See the installer page](https://arkppf.com/installers). - Rolls suit a shop with a plotter and pattern software, a steady flow of work, and jobs that vary from car to car. - Pre-cut kits suit a shop without a plotter, a job it rarely cuts, or a week when the plotter is busy. ## No platform recommended ARK does not name or recommend a pattern platform. The right one is the one your shop already cuts well with. ## These are starting settings, not your settings The cut spec is where to start for a film of this thickness, not a setting proven on your plotter. Blades wear and plotters differ, so prove the numbers on an offcut before a customer’s job. A setting copied without a test cut and run into a customer’s bumper is worse than none. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. ## Read next - [Is thicker film better? What mil ratings mean](https://arkppf.com/guides/is-thicker-ppf-better) - [Film defect or install defect? How to tell what went wrong](https://arkppf.com/guides/film-defect-or-install-defect) --- # Should you fix rock chips and swirls before PPF goes on? - Canonical page: https://arkppf.com/guides/rock-chips-and-paint-correction-before-ppf - Publisher: ARK PPF (https://arkppf.com/) - Written for: Car owners - Published: 2026-11-15 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer Fix the chips you do not want to keep seeing before the film goes on. Clear film seals in whatever is underneath: a chip stays visible through it, and a deep one can show as a small dip in the film. Swirls are the same, so paint correction, where the paint needs it, comes before the film, never after. ## Why film does not hide a chip Clear film is meant to disappear over the paint, and that is exactly why it does not hide what is in the paint. The chip is still there, now under a clear, glossy layer that can make its edge easier to see. A deep chip is also a hollow. Film laid over it bridges the gap, and the dip can show as a small mark in the film’s surface. ## Repair, touch up or leave it There is no single right answer. It depends on how deep the chip is and how much it will bother you. If a panel is repaired or repainted, the body shop that painted it is the one to say when it is ready for film. The ARK warranty covers film on a professionally refinished, fully cured panel the same way as film on original paint. Tell the shop fitting the film which panels, and when. - A chip through to the primer or the metal: have it repaired first. It is also where moisture gets in. - A small chip you can only see up close: a careful touch-up, or leave it and accept it. - A front end covered in chips: ask whether a repaint of that panel makes more sense than film over the damage. ## Do you need paint correction before PPF? Paint correction means machine polishing the clear coat to take out swirls and light scratches. If the paint has marks you do not want kept, correction comes first, because once the film is on, those marks are sealed under it. Paint in good condition needs little or none. A new car usually needs the least. The shop should look at the paint and tell you which it needs before it quotes. ## The step nobody sees Every panel is washed and decontaminated before film goes on, whether or not it is corrected. Tar, iron and road film left on the paint end up under the film, and dirt under an edge is where lifting starts. ## Who does what Chip repair and repainting are body-shop work. Washing, decontamination and correction may be done by the shop fitting the film or before you bring the car in: ask whether the quote includes them, and who does the repair if one is needed. A useful quote lists the preparation separately. [What drives the price of a PPF job](https://arkppf.com/guides/what-drives-the-price-of-a-ppf-job). ## Even a good repair can still be seen A touch-up fills a chip; it rarely makes it invisible, and clear film over it will not either. Decide before the film goes on whether you can live with what remains, because afterwards it is sealed in. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. - [ARK Fusion](https://arkppf.com/products/fusion) (ceramic gloss): Clear gloss film with the water-repellent layer in its own top coat, for the buyer weighing film plus a separate coating. ## Read next - [What to ask an installer before you book](https://arkppf.com/guides/what-to-ask-an-installer-before-you-book) - [What drives the price of a paint protection film job?](https://arkppf.com/guides/what-drives-the-price-of-a-ppf-job) --- # Reading a PPF data sheet: what each row means - Canonical page: https://arkppf.com/guides/reading-a-ppf-data-sheet - Publisher: ARK PPF (https://arkppf.com/) - Written for: Paint protection film installers and shops - Published: 2026-11-15 - Values marked ⟨ … ⟩ are not confirmed yet; ARK PPF does not publish a guess in their place. ## Short answer A PPF data sheet describes the film layer by layer: its thickness, the base material, the top coat, the temperature at which the top coat heals, how strongly it beads water, how glossy it is and how far it stretches before it breaks. Read each figure with one question: is it measured on this film, or typical of the class? ## Thickness Quoted in mils, thousandths of an inch. Ask which layers the figure counts: film alone, film and adhesive, or the liner too. Defender: 8.5 mil. [Is thicker film better?](https://arkppf.com/guides/is-thicker-ppf-better) ## Base material: aliphatic or aromatic TPU The base is the bulk of the film, usually a thermoplastic polyurethane (TPU). The word in front of it names the kind of urethane: aliphatic or aromatic. The two behave differently in sunlight, and a sheet that names one is telling you which chemistry the film is built on. ARK’s base row reads Aliphatic TPU. Thickness and warranty are ARK’s own figures. The other rows are industry-typical values for this class of film, confirmed by ARK for publication, not ARK test results. How a particular film holds up in sun is a matter of its whole construction, the adhesive and the top coat included, and of measurement over time. ARK publishes no yellowing result yet. ## Top coat The thin outer layer that carries the surface: gloss or satin, water repellency, stain resistance and self-healing. Fusion’s row reads Ceramic-infused hydrophobic self-healing coat. ## Self-heal activation The temperature the data sheet gives for the top coat to relax back over a light mark. Light marks close faster the warmer the surface, and more slowly in the cold, which is why sun or a warm rinse helps. The row on ARK’s sheets: 60 °C. It says nothing about deep marks: if you can catch it with a fingernail, it stays. ## Water contact angle The angle a water droplet makes where it meets the surface. The higher the angle, the rounder the bead and the more readily water rolls off; above 90° a surface is usually called hydrophobic. Fusion, the ceramic gloss film: 105 °. The effect fades with use and comes back with maintenance. ## Gloss at 60° Measured with a gloss meter at a 60° angle, in gloss units (GU). Higher is shinier; a satin film reads far lower on purpose. Defender: 92 GU. Umbra (a working name), the satin film: 20 GU. ## Elongation at break How far a sample stretches, as a share of its length, before it breaks. It shows how much the film tolerates on curves, but fitting never goes near that limit: film stretched far enough to whiten is already a stretch mark. Defender: 350%. ## The roll label The label is the part of the sheet that travels with the film. It should print the film, thickness, finish, warranty, roll size and a lot number. ARK’s standard roll is 60 in × 50 ft. Write the lot on every job record, because a roll traces back to its batch when a claim comes in. ## A data sheet is only as good as its sources A figure without a test behind it is a claim. Ask which rows are measured on the film itself. ARK says so beside every sheet: Thickness and warranty are ARK’s own figures. The other rows are industry-typical values for this class of film, confirmed by ARK for publication, not ARK test results. ## Films this guide touches - [ARK Defender](https://arkppf.com/products/defender) (gloss): The thick clear film, for the driver asking how much stone a hood can take before it chips. - [ARK Fusion](https://arkppf.com/products/fusion) (ceramic gloss): Clear gloss film with the water-repellent layer in its own top coat, for the buyer weighing film plus a separate coating. - [ARK Umbra](https://arkppf.com/products/umbra) (satin): Satin film for two buyers: the one who wants gloss paint turned satin, and the one whose factory matte paint cannot be colour-matched or polished. - [ARK Spectrum](https://arkppf.com/products/spectrum) (colour): Colour film for the buyer choosing between a vinyl wrap and a change of colour that also protects the paint. It is not the answer to a clear-film question. ## Read next - [Is thicker film better? What mil ratings mean](https://arkppf.com/guides/is-thicker-ppf-better) - [Does paint protection film turn yellow?](https://arkppf.com/guides/does-paint-protection-film-turn-yellow)